Fierastrau cu banda de precizie Pegas

• Detalii si caracteristici.
• Carcasa din fonta pentru stabilitate si fiabilitate.
• Roti echilibrate din aluminiu pentru evitarea vibratiilor. 
• Motor cu doua viteze. 
• Garda pentru lama. 
• Un sistem de siguranta asigura ca masina nu va functiona decat cand usile sunt inchise. 
• Masa din fonta cu inclinatie la 40°, este acoperita cu un strat antiuzura. 
• Sistemul de aspirare plasat direct sub masa pentru a elimina rapid rumegusul. cy
• Echipamentul este certificat CE de catre TÜV Rheinland

Date tehnice:

• Greutate - 70 kg
• Putere motor - 550 W
• Port extractie rumegus - 58 / 65 mm
• Grosime maxima de taiere - 150 mm
• Adancime maxima de taiere fara ghidaj - 330 mm
• Marime masa prelucrare - 406 x 406 mm
• Inaltime masa - 1045 mm
• inclinare masa - 0-40 °
• Diametru roata - ø 353 mm
• Lungime banda fierastrau - 2375 mm
• Latime banda fierastrau min./max. - 1 / 3 mm
• Viteza banda fierastrau - 700 / 1050 m/min
• Dimensiuni totala fara suport - 525 x 580 x 700 mm

Sistemul de ghidaj a lamelor  PÉGAS® PRECISION GUIDING SYSTEM 

Sistemul de ghidaj  Pégas® este necesar daca se folosesc panzele Pégas® pentru ca sunt foarte fine si au nevoie de sustinere corecta.   
Ghidajele de sus si cele de jos sunt prelucrate pe CNC din bucati de aluminiu si au rulment. Santurile prelucrate ghideaza corect panza pentru a putea realiza 

. 

Description

 

Manufacturer

The precision band saw from Pégas is a global innovation which works with the finest and most precise saw blades that have ever been made. This unique development is dedicated to both hobbyists and professional users in the woodworking industry. 
The heart of the machine is a specially developed roller guide system that is perfectly adapted to the Pégas fine-cutting saw blades. The guide consists of one roll bearing above and one roll bearing below the machine table that contains a guiding groove which is adapted to the respective fine-cutting saw blade. 
The extremely slender fine-cut saw blade with a width of only 1.02 to 3 mm is guided perfectly without any twisting, enabling even the finest cuts with complicated shapes and the narrowest radius of less than 2 mm. The special tooth design avoids vibrations completely and provides for a high cutting performance with an incredible smooth finish of the edges. For soft and hardwood with a thickness of up to 150 mm. 
Additional advantages:

• Machine table working height 106.5 cm (optionally adjusted to 78.5 cm for seated working position - Replacement feet No. 716063)
• Machine frame and table made of warp-resistant cast iron, lower frame and roller coverings made of sheet steel
• Machine table can be tilted up to 40° and has a wear-resistant coating with increased sliding ability
• Two speed levels
• Safety switch in both doors prevents the machine from being turned on with the door open
• Balanced track rollers made of aluminium covered with replaceable rubber bands
• Diameter 65/58 mm connecting pieces for optimum dust extraction
• High dead weight, approx. 70 kg, for vibration-free operation
• CE-Certified by TÜV Rheinland

 

Scope of delivery

• Lower frame, height 58 cm, base surface area 525 x 575 mm
• Integrated LED light with gooseneck
• Two roller guides with two different guiding grooves. Suited for fine-cutting saw blades No. 9 / 12 (Nr. 716066 / 716068)
• Two saw blades (respectively 1x No. 9 and No. 12)
• Instructions in German, English and French

 

more